Remove a Retract from a Vehicle

Use these steps to remove a retract from a vehicle from a tunnel entrance terminal.

Before Send Car

Use these steps to remove a retract from a vehicle before it's sent.

Select the vehicle from the queue.

Select the Retracts tab (the number of retracts assigned to the vehicle is displayed on the tab). Note: Up to 8 retracts are displayed on the tab. If the site has more than 8 retracts (up to 16), a Show All function is available.

Select Show All. A Retracts dialog opens.

Select the retract to remove. The retract is no longer selected.
Select Submit. The Retracts dialog closes and the change is saved.
Select Send Car.

After Send Car

Use these steps to remove a retract from a vehicle after it's sent.

After Send Car is selected, the Send Car function is unavailable until a CarAdvanced signal is received from the tunnel controller.
Retracts can still be removed while Send Car is unavailable.
After the CarAdvanced signal is received, the vehicle is moved from the first queue position to "Last Sent" position, Send Car is available, and retracts can't be removed from the sent vehicle.